Autor Tema: Cyclone Update  (Pročitano 9718 puta)

0 članova i 1 gost pregledaju ovu temu.

Na mreži Tomislav

  • Administrator
  • *****
  • Poruke: 774
  • Age: 48
  • Lokacija: Beograd Mirijevo
    • Motocikli
  • Grad: Beograd Mirijevo
Odg: Cyclone Update
« Odgovor #10 poslato: Novembar 12, 2011, 11:06:29 pre podne »
 Cyclone Box Broadcom Unlocker Released

Hi, new update for Cyclone Box is ready.

Added support for reading Unique Data files for Broadcom 21351 based Nokia Phones (X2, C3, .. and more of them).

After read Unique Data you can:
- Unlock SP locks by reading LBF data
- Backup FULL RPL (including superdonlge) 100% Nokia-Like
- Repair corrupted Superdongle keys
- Authorize your phone with SX4 emulation inside box
- Detailed Security Analysis
- Downgrade this phones
- More ...

X2 Example Uni Data read and Security operation

Quote:
Started Phone Security Analysis...
[Nokia X2-00 USB Phonet]: Port opened OK!
MCU Version   V 04.90
MCU Date   28-09-10
Product    RM-618 (Nokia X2-00)
Manufacturer   (c) Nokia
IMEI    352699049966024
Mastercode   554352325
Reading Security Block...
Security block OK and saved to "RM-618_352699049966024_2011-11-12_132245.SecurityBlock.PM"
Step 1 : Testing SIMLOCK
SIMLOCK SEFLTEST PASSED OK!
Step 2 : Testing SECURITY
SECURITY SEFLTEST PASSED OK!
Step 3 : Analyzing Security Block
WARNING: "48400406073ECC4443B83B4151F972ABA08B3D66.C0003160 " Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
[Nokia X2-00 USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
New ROM Detected
CMT_SYSTEM_ASIC_ID:   000000000000000022000509200C0000
CMT_EM_ASIC_ID:    00005361
CMT_PUBLIC_ID:    48400406073ECC4443B83B4151F972ABA08B3D66
CMT_ASIC_MODE_ID:   00
CMT_ROOT_KEY_HASH:   1B0D74C532CA1C6133940C740E8C786E
CMT_BOOT_ROM_CRC:   DE56D582
CMT_SECURE_ROM_CRC:   BDDE7A3A
CMT Ready!
BCM21351_usb2nd.fg, Type: 2nd Boot Loader, Rev: 513.11.24.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020003000000131, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020003000000131, ST, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Sending Auxiliary Loader...
Auxiliary Loader Sent!
Loader: RAPxx CommonBoot v1.07 (C) 2011 KarwosLabs
Custom loader running OK! Working...
Cyclone Server (1.0.0.676), Cyclone Box Team 2008-2011 - Ready.
If phone doesn't powering into Local Mode now for some reason do following:
1. Re-insert battery
2. Power it on, when asked use Ovi/Pc Suite Mode
Readed OK, Saving to "48400406073ECC4443B83B4151F972ABA08B3D66.C0003160 "
Checking SUPERDONGLE...
SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
Checking SIMLOCK...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking MCU&DSP TIMESTAMPS...
MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!
Checking CMLA KEYS...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking ECC KEYS...
ECC KEYS FOUND AND CHECKSUM OK! PASSED!
Checking DIV KEYS...
DIV KEYS FOUND AND CHECKSUM OK! PASSED!
Analyze finished!

PS1: Server connection and 10 credits (with 100 credits threshold) required to perform Broadcom Uni Data dump.

PS2: After reading uni data, all operations is standalone (just likely previous basing upon cached data)

PS3: Server charged credits, but my phone got disconnected during hash read operation, and hash not readen. What to do, what to do? If your account has been charged, the data generated at server are cached too... That means you can repeat process again (previously charging battery, i.e.), server transaction will be succeeded and no credits charged.

Box firmware v01.82 is required to use this update.
Software and loaders should be automatically updated.
In case if you have aborted your update process, and now having problem with running app - you can download http://www.karwos.hk/updater/Cyclone.exe and place it in your Cyclone directory...

MORE COMING !!!
Best Regards,
Cyclone Box Team

Van mreže zokisabac

  • Global Moderator
  • *****
  • Poruke: 316
  • Age: 40
  • Lokacija: sabac
Odg: Cyclone Update
« Odgovor #11 poslato: Decembar 07, 2011, 06:38:21 posle podne »
Cyclone Box FREE and STANDALONE Broadcom Hash Read
hello

Broadcom Unlocking (via LBF Hash Read)/SX4 Authorization/SD Repair/etc is now fully FREE and STANDALONE, just simply as previous models.
No internet connection and credits needed

Just to remind Cyclone is one box which support all of hashes free and standalone now
This includes reading data from RAP3Gv3, RAP3Gv4, RAPUv1, RAPUv21 (world's first), Broadcom, XGold1, and shortly from XGold2 (maybe free, maybe with credits, we'll decide).

NOTE
No firmware upgrade is needed. Just run Cyclone and it will auto-update main exe + loaders.

Make sure you have latest installer installed, if not, grab one from http://www.karwos.hk/CycloneBoxInstaller.exe

Firmware required, v01.82 (from Nov 12), no upgrade needed if u have one already.

Best Regards,
Cyclone Box Team  ;)

Na mreži Tomislav

  • Administrator
  • *****
  • Poruke: 774
  • Age: 48
  • Lokacija: Beograd Mirijevo
    • Motocikli
  • Grad: Beograd Mirijevo
Odg: Cyclone Update
« Odgovor #12 poslato: Decembar 20, 2011, 11:31:09 posle podne »
CycloneBox Installer v1.17 with Xperia Addon and more

=====================
Installer v1.17
20.12.2011
=====================

- SE Xperia Unlocker introduced (this is 3rd party addon)
Supported Phones :
Xperia X10 Mini - E10i
Xperia X10 Mini Pro - U20
Xperia X8 - E15i
Xperia W8 - E16 - E16i
Xperia X10
Xperia X10i
Xperia X10a
Docomo SO-01B
All These Phones supported without TEST POINT

- Added Real time SE Xperia Unlocker account Creator in 'Credits' tool.
(This is the best option for Online web shop resellers as Addon works without Box)Reseller can generate accounts real time with box)
10 Cyclone credits = 1 Xperia phone log
- BB5 FBUS/USB Loaders v11.40.00 Introduced
- Introduced previous updates (standalone and free Broadcom unlocking, RAPUv21, etc)
- PM Protection is now unticked by default
- PM Protection is automatically unticked during SX4 operations
- Full Erase for New Protocol APE phones fixed (wrong CMT Flash Device Index selected)
-Added New bright skin
- Minor changes and Bugfixes

Download Links
http://www.karwos.hk/CycloneBoxInstaller.exe
Multiupload.com - upload your files to multiple file hosting sites!

Discussion thread
21-12-2011 CycloneBox Installer v1.17 with Xperia Addon and more

br
CycloneBox Team

Van mreže steva

  • Global Moderator
  • *****
  • Poruke: 794
  • Age: 39
  • Lokacija: SRBIJA
  • Grad: Lazarevac
Odg: Cyclone Update
« Odgovor #13 poslato: Februar 04, 2012, 11:26:35 posle podne »
Cyclone Bomb, Nokia X1-00 / X1-01 Unlock Added
Hi, new update for Cyclone Box is released.

What's new?
- Added support for LBF data read for new XGold110 based phones, this is X1-00, X1-01, absolutly WORLD FIRST
- Nokia X1-00, X1-01, 100, 101, 102 flashing added
- 20 Digits is now checked upon XGold1xx Hash Read, as users reported 20 digit phones (i.e. new 1616 from Yoigo Spain). The 20 digits phones will not be readed now, to not loss the computation power of SL3 Clusters.
- When 20 Digits NCK is found upon BB5 LBF read, operation will be canceled (previously - asked whether to continue, or not), same reason as up
- Minor changes and bugfixes

How to update?
Just run Cyclone, autoupdate will replace Cyclone.exe.

Van mreže cezar

  • VIP
  • ***
  • Poruke: 235
  • Lokacija: REPUBLIKA SRPSKA
Odg: Cyclone Update
« Odgovor #14 poslato: Februar 08, 2012, 07:58:15 pre podne »
Cyclone BOMB AGAIN, Nokia 100/101/102 Unlock Added!

Hi to all! New BOMB Update for Cyclone Box is ready Again!!

What's new ??
- Added support for unlock by LBF read for latest XGold113 Nokia Phones, this is Nokia 100, 101, 102, again WORLD FIRST
- Latest XGold110/113 phones is also supported to full RPL Read (IMEI + Simlock), so afterwards Simlock or IMEI could be fully restored - world's first too... Using RPL method also Keypad/FBUS counter might be resetted.
- Added support for Profile Bits analyze upon LBF dump for XGold1xx, so phones which will not accept code via neither keypad or FBUS handler - Log file will not be readen
- Minor changes and bugfixes

How to update?
1. Run Cyclone Box Software, and autoupdate module will download necessary files. On failure, you can download new exe manually from http://www.karwos.hk/updater/Cyclone.exe and place it at C:\Program Files\Cyclone Box
2. Also Firmware v01.85 is Required. Update your box via Box Maintenance, or just agree upon first Nokia Tool launch.

Van mreže steva

  • Global Moderator
  • *****
  • Poruke: 794
  • Age: 39
  • Lokacija: SRBIJA
  • Grad: Lazarevac
Odg: Cyclone Update
« Odgovor #15 poslato: Februar 09, 2012, 08:08:49 posle podne »
Cyclone Box Fast and Standalone Level1-Level7 NCK Calculator from COD Released
Hi to all! New Update for Cyclone Box is ready Again!!

What's new ??
- Added Fast Standalone Level1-Level7 Codes Calculator from COD Files, supported format is Common Cyclone COD File, oclHashCat Unix/Windows, MXCrap. Not supported format? Send us file. No more server waiting!
- SX5 Serial Number injection during Level1-Level7 from COD Calculation is supported. "0" is recommended serials, other may give you - "Wrong code". Use only CHECKED SX5 Serials!
- Removed Send COD File To Server, Receive Level7 Code, etc routines.
- Minor changes and bugfixes

How to update?
1. Run Cyclone Box Software, and autoupdate module will download necessary files. On failure, you can download new exe manually from http://www.karwos.hk/updater/Cyclone.exe and place it at C:\Program Files\Cyclone Box
2. Also Firmware v01.86 is Required. Update your box via Box Maintenance, or just agree upon first Nokia Tool launch.

Best Regards,
Cyclone Box Team
More to come...

Na mreži Tomislav

  • Administrator
  • *****
  • Poruke: 774
  • Age: 48
  • Lokacija: Beograd Mirijevo
    • Motocikli
  • Grad: Beograd Mirijevo
Odg: Cyclone Update
« Odgovor #16 poslato: Februar 13, 2012, 10:15:41 pre podne »
Cyclone Box New Security Blackberry Update Released
Hi, new firmware v 01.87 for Cyclone Box was just uploaded at server.

Added new security MEP-12209-010 WORLD FIRST

Just upgrade your box via Box Maintenance and enjoy.


More to come,
best regards,
Cyclone Team

Na mreži Tomislav

  • Administrator
  • *****
  • Poruke: 774
  • Age: 48
  • Lokacija: Beograd Mirijevo
    • Motocikli
  • Grad: Beograd Mirijevo
Odg: Cyclone Update
« Odgovor #17 poslato: Februar 14, 2012, 09:42:17 pre podne »
Cyclone Box Free and Standalone XGold213 Unlocking Released

Hi, new update for Cyclone Box is released.


Added hash reading for LBF for XGold213 based phones. Operation is free, quick and standalone.
And now best, you don't need to know phone CPU platform. Just select USB connection, go to BB5 tab, click good old "Read LBF Data" button, and Cyclone will AUTOMATICALLY detect if this is xgold213, or Texas Instruments based product.

Supported models:

Asha 200 RM-761
Asha 200 RM-762
C1-01 RM-607
C1-01 RM-608
C1-02 RM-643
C1-02 RM-644
C2-00 RM-704
C2-02 RM-692
C2-02 RM-693
C2-05 RM-724
C2-05 RM-725
C2-03 RM-702
C2-06 RM-702
C2-07 RM-692
C2-08 RM-702
X2-02 RM-694
X2-05 RM-772

Operation log:

Code:
Reading SL3 LOG File...
[Nokia C1-01 USB Phonet]: Port opened OK!
MCU Version   V 06.07
MCU Date   13-10-11
Product      RM-607 (Nokia C1-01)
Manufacturer   (c) Nokia           
IMEI      359763042577981
Mastercode   266565212
XGold213 Detected
Analyzing Profile Bits...
Phone can be NCK unlocked using KEYPAD
Phone can be NCK unlocked using FBUS
15 Digits NCK Found
Booting X-Gold via USB...
If PC Can't detect any new device, probably your phone is erased. Do following if needed:
1. Eject battery
2. Eject cable
3. Insert cable
4. Insert battery
5. Press power-on
[Nokia C1-01 USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
X-Gold: Ready, MCU ID Block: 1FB300020303010100FF
[PBL] : Ready
[EBL] : Mode CC
[EBL] : Quantum_Bootloader_2.5_M1S1
[EBL] : Ready
Setting Baudrate to 6500000bps...
Baudrate Accepted (6500000bps)
Flash Chip 0x00898982, Intel, Size: 64MBytes
Success!
Release Notes
1. You should have installed latest installer from http://www.karwos.hk/CycloneBoxInstaller.exe (this one released at October 2011, most users don't need thus)
2. Autoupdate will work, if not, download new exe manually from http://www.karwos.hk/updater/Cyclone.exe
3. If you encountering Autoupdate problems, check firewall.
4. After updating, make sure on bottom-right statusbar you have "No updates avaiable". This updates also downloading XMM2130 loaders from server, so make sure before you start LBF'ing XGold213, you get "No updates avaiable" - this will ensure your 100% success reading LBF data.
5. New firmware v01.88 is required. Update box using Box Maintenance. Please be patient during upgrade progress and don't disconnect your box. We have increased update tries credit numbers from 3 to 5, because of some users problems with update process.

Na mreži Tomislav

  • Administrator
  • *****
  • Poruke: 774
  • Age: 48
  • Lokacija: Beograd Mirijevo
    • Motocikli
  • Grad: Beograd Mirijevo
Odg: Cyclone Update
« Odgovor #18 poslato: Mart 01, 2012, 07:03:55 posle podne »



How to update?
Run Cyclone Box Software, and autoupdate module will download necessary files. On failure, you can download new exe manually from http://www.karwos.hk/updater/Cyclone.exe and place it at C:\Program Files\Cyclone Box

Na mreži Tomislav

  • Administrator
  • *****
  • Poruke: 774
  • Age: 48
  • Lokacija: Beograd Mirijevo
    • Motocikli
  • Grad: Beograd Mirijevo
Odg: Cyclone Update
« Odgovor #19 poslato: Maj 05, 2012, 10:21:26 posle podne »
CycloneBoX Installer v1.20 (04.05.2012)

Things which introduced in new Version

- New Faster and reliable Hw introduced (Cyclone Box Reloaded)
- New Loaders v11.50.00 added
- FastMM v4.99 Introduced
- MEP-40488-004 added
- Xgold113 (Dual-sim) RPL write support added- Project completly refactorized from scratch. Compiler changed from obsolete Delphi7 to Delphi2007. Just because of this, lots of stability and speed improvment gained.
- "News" added in main window
- "New Super Easy Downgrade" BB5 method added (Backup,flash,downgrade,restore rpl all just in one click)Tick in before-flash tasks
- Added Windows 7 interactive progressbar when minimized to tray. When software is minimized, you will notice status of current job: green progressbar - working, red progressbar - error, yellow-paused, etc
- Boot recovery added for all boxes during box wizard
- Added COD->NCK verification upon data generation
- After COD->NCK calculation, NCK codes are automatically stored inside COD file
- New Paths is now addded to default Flash Path Search table (C:\Users\xxxx\AppData... etc)
- Box wizard Added; this is all-in-one tool which will: repair, upgrade, activate, register, bootloader recovery, smartcard refill, bootloader upgrade, etc your box. Just one click.


Improvements

- No need anymore to tick "Old USB flashing method" manually, it's detected automatically
- When Windows 7 is detected, software is not hidden to tray
- Bootloader reverted to v2.13 (temporary solution, v3.01 will get back soon)
- Automatic smartcard refill when empty addded
- Software is redesigned now. To gain full funcionality YOU DON'T NEED run as "Admin". This means you can be ensured about our software quality and security - no hidden trojans (as happened before with other products).
- Splash updated
- Box Registration module removed (box wizard introduced)
- Box Maintenance module removed (box wizard introduced)
- Card Maintenance module removed (box wizard introduced)
- The paths is now updated on each sw startup
- Only one copy of Cyclone Box application can be launched now, this improves stability
- "cyclonebox.dll not found" message when no drivers installed changed to suitable message box asking to connect your box first time and install drivers
- Skin Stack Updated to v7.62


Bug Fixes

- Windows7 Permission issues fixed (needed "Run as admin" to work properly with autoupdate)
- Fixed Windows7 Save Paths/Settings problem
- BB5 loader problems when skin enbled (ROM refused...etc)
- Access violation on exit fixed
- CBUS Lost Handle Fixed
- "cyclonebox.dll not found" message when no drivers installed changed to suitable message box asking to connect your box first time and install drivers
- libeay/ssleay libraries updated to latest one, much more fast and stable
- NCK Code Sending fixed for SIMLOC30 phones (0x01 error)
- Fixed tray issues
- Autoupdate code is now checking for installed installer, if obsolete then asks for download latest version
- Improved RPL backup in USB mode (Custom Loader didn't reset phone to FlashMode, and some backups did contain Superdongle/Simlock data only)
- XGold/Blackberry Service "Credits" renamed to "Counter" (because it is a counter, not real fee-credits), as it puts too much confusion
- "security problem #1" solved on those who copied cyclonebox.dll before
- Fixed interrupted auto-update problems (after restart - this is not valid Win32 application)
- Minor changes and bugfixes

Important Notes

1. If you are using old (Classic) Cyclone Box and having old Card serial number (2009,2010) and after latest
bootloader upgrade, your box can't enter into bootloader mode, your box boot need Recovery. This will be proceeded AUTOMATICALLY, just use Box Wizard.
2. Box Maintenance, Box Registration, Card Maintenance are removed from this release
3. Your box having 3 update credits from now
4. Box Firmware v02.01 is required, so this update could be operational
5. Use "Box Wizard". This is one-click tool for box repair (boot recovery), upgrade, activation, registration, smartcard upgrade/initialization, and so on.
6. If you are using Windows 7, autoupdate in old version may fail (fixed already). In case download installer directly, or run SW with Admin privileges.
7. ALWAYS fresh installer you could find at: http://www.karwos.hk/CycloneBoxInstaller.exe
8. Autoupdate after updating EXE should ask you for downloading and installing latest installer. If something will fail during Autoupdate process, just look at 7 and download Installer manually.